whatman Autovial Syringeless Filters AV125SNAO

发表于由

whatman Autovial Syringeless Filters AV125SNAO

产品型号: AV125SNAO
产品展商: 其它品牌


简单介绍
whatman Autovial Syringeless Filters AV125SNAO Autovial™非针头式滤器是一种预装的滤器，用于除去样品中的微粒。它用一个简单、一次性的装置代替了注射器和过滤器的组合。


whatman Autovial Syringeless Filters AV125SNAO的详细介绍


whatman Autovial Syringeless Filters AV125SNAO

Autovial™非针头式滤器是一种预装的滤器，用于除去样品中的微粒。它用一个简单、一次性的装置代替了注射器和过滤器的组合。

Autovial滤器由2部分组成：一个逐层过滤筒和一个活塞，可过滤5-12ml样品。

Autovial可根据应用选择滤膜。样品可以被注入5ml或12ml的过滤筒，推动活塞直到过滤筒底部，在活塞和样品之间有一个空气层。将Autovial的头部置于自动加样器小瓶或容器口，推动活塞，可直接将滤除液收集，然后在仪器上操作。

特点
·一体化装置省时，不用安装，方便操作
·可选过滤介质，应用于不同样品
·可用于有害样品，一体化设计避免了滤器突然脱离的风险
·内置排气设计，*大化样品回收
·可选无菌包装
·独特的预滤设计，可用于难于过滤的样品（Autovial 5中无预滤器，Autovial 12可选预滤器）
·可选玻璃纤维或聚丙烯预滤器

根据应用不同，可选不同的Autovial滤膜
·醋酸纤维素（CA）：低非特异性蛋白结合、高载量膜，用于生物溶液
·玻璃微纤维（GMF）：深度过滤，水相或有机相溶液
·尼龙（NYL）：水相或有机相样品，pH3-10
·聚醚砜（PES）：低非特异性蛋白结合膜，用于水相溶液
·聚丙烯（PP）：疏水膜，抗大多数有机溶剂
·聚四氟乙烯（PTFE）：Teflon膜，用于50%以上的有机溶剂
·聚偏二氟乙烯（PVDF）：低非特异性蛋白结合膜，用于水相溶液或有机溶剂

专利号 # 4,859,336

技术参数- Autovial 非针头式滤器                                                                                                                                           
  Autovial 5 Autovial 12
管身 聚丙烯 聚丙烯
过滤区域 1.7 cm2 3.0 cm2
过滤量 5 ml 12 ml
回收量 30 µl 140 µl
连接口 Male slip luer Male slip luer
灭菌 121°C ， 20分钟 121°C，20 分钟

whatman Autovial Syringeless Filters AV125SNAO

订货信息 – Autovial 非针头式滤器                                                                                                                                          
货号 描述
Autovial 5 – 无预滤器
Nylon 过滤介质
AV115NPUNYL Autovial 5 Syringeless Filter, no prefilter, nylon, 0.45 µm, 50/pk
PVDF 过滤介质
AV115NPUAQU Autovial 5 Syringeless Filter, no prefilter, PVDF, 0.45 µm, 50/pk
PTFE 过滤介质
AV115NPEORG Autovial 5 Syringeless Filter, no prefilter, PTFE, 0.2 µm, 50/pk
AV115NPUORG Autovial 5 Syringeless Filter, no prefilter, PTFE, 0.45 µm, 50/pk
GMF 过滤介质
AV115UGMF Autovial 5 Syringeless Filter, no prefilter, GMF, 0.45 µm, 50/pk
Autovial 12 – 无预滤器
PES 过滤介质
AV125NPUPSU Autovial 12 Syringeless Filter, no prefilter, PES, 0.45 µm, 50/pk
PVDF 过滤介质
AV125NPUAQU Autovial 12 Syringeless Filter, no prefilter, PVDF, 0.45 µm, 50/pk
Autovial 12 – 带有玻璃预滤器
醋酸纤维素过滤介质
AV125UCA Autovial 12 Syringeless Filter, glass prefilter, cellulose acetate, 0.45 µm 50/pk

混酯过滤介质
AV125PDCE Autovial 12 Syringeless Filter, glass prefilter, mixed ester, 0.65 µm, 40/pk

Nylon 过滤介质
AV125SNAO Autovial 12 Syringeless Filter, glass prefilter, sterile, nylon, 0.2 µm, 40/pk
AV125ENAO Autovial 12 Syringeless Filter, glass prefilter, nylon, 0.2 µm, 50/pk
AV125UNAO Autovial 12 Syringeless Filter, glass prefilter, nylon, 0.45 µm, 50/pk
AV525UNAO Autovial 12 Syringeless Filter, glass prefilter, nylon, 0.45 µm, 1000/pk
PVDF 过滤介质
AV125SAQU Autovial 12 Syringeless Filter, glass prefilter, sterile, PVDF, 0.2 µm, 40/pk
AV125EAQU Autovial 12 Syringeless Filter, glass prefilter, PVDF, 0.2 µm, 50/pk
AV125UAQU Autovial 12 Syringeless Filter, glass prefilter, PVDF, 0.45 µm, 50/pk
AV525UAQU Autovial 12 Syringeless Filter, glass prefilter, PVDF, 0.45 µm, 1000/pk
PTFE 过滤介质
AV125SORG Autovial 12 Syringeless Filter, glass prefilter, sterile, PTFE, 0.2 µm, 40/pk
AV125EORG Autovial 12 Syringeless Filter, glass prefilter, PTFE, 0.2 µm, 50/pk
AV125UORG Autovial 12 Syringeless Filter, glass prefilter, PTFE, 0.45 µm, 50/pk
AV525UORG Autovial 12 Syringeless Filter, glass prefilter, PTFE, 0.45 µm, 1000/pk
GMF 过滤介质
AV125UGMF Autovial 12 Syringeless Filter, glass prefilter, GMF, 0.45 µm, 50/pk
GF/B 过滤介质
AV525BGMF Autovial 12 Syringeless Filter, glass prefilter, GF/B, 1.0 µm, 1000/pk
Autovial 12 – 带有聚丙烯预滤器
PP 过滤介质
AV125EPP Autovial 12 Syringeless Filter, Polypropylene prefilter, PP, 0.2 µm, 50/pk
AV125UPP Autovial 12 Syringeless Filter, Polypropylene prefilter, PP, 0.45 µm, 50/pk

Autovial™ syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.

Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 ml and 12 ml volume capacity.

The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 ml or 12 ml capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.

Features and benefits

  • Single unit convenience saves time. No assembly required – easier to load
  • Choice of filter media. Compatible with a wide range of sample types
  • Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
  • Built-in air purge maximizes sample recovery
  • Sterile option available to maintain sample integrity
  • Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
  • Choice of glass fiber or polypropylene prefilters

Autovial membranes are available for various applications:

  • Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
  • Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
  • Nylon (NYL):  for aqueous and organic samples within a pH range between of 3 to 10
  • Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
  • Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
  • Polytetrafluorethylene (PTFE): Teflon membrane for samples with > 50% organic solvent
  • Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents

Patent # 4,859,336

Typical Data – Autovial Syringeless Filters
  Autovial 5 Autovial 12
Housing Polypropylene Polypropylene
Filtration area 1.7 cm2 3.0 cm2
Capacity 5 ml 12 ml
Volume ‘Hold Up’ 30 µl 140 µl
Outlet connection Male slip luer Male slip luer
Autoclavable 121°C for 20 minutes 121°C for 20 minutes

 

Ordering Information – Autovial Syringeless Filters
Catalog Number Description
Autovial 5 – No Prefilter
Nylon Filtration Media
AV115NPUNYL Autovial 5 Syringeless Filter, no prefilter, nylon, 0.45 µm, 50/pk
PVDF Filtration Media
AV115NPUAQU Autovial 5 Syringeless Filter, no prefilter, PVDF, 0.45 µm, 50/pk
PTFE Filtration Media
AV115NPEORG Autovial 5 Syringeless Filter, no prefilter, PTFE, 0.2 µm, 50/pk
AV115NPUORG Autovial 5 Syringeless Filter, no prefilter, PTFE, 0.45 µm, 50/pk
GMF Filtration Media
AV115UGMF Autovial 5 Syringeless Filter, no prefilter, GMF, 0.45 µm, 50/pk
Autovial 12 – No Prefilter
PES Filtration Media
AV125NPUPSU Autovial 12 Syringeless Filter, no prefilter, PES, 0.45 µm, 50/pk
PVDF Filtration Media
AV125NPUAQU Autovial 12 Syringeless Filter, no prefilter, PVDF, 0.45 µm, 50/pk
Autovial 12 – With Glass Prefilter
Cellulose Acetate  Filtration Media
AV125UCA Autovial 12 Syringeless Filter, glass prefilter, cellulose acetate, 0.45 µm 50/pk

Mixed Ester Filtration Media
AV125PDCE Autovial 12 Syringeless Filter, glass prefilter, mixed ester, 0.65 µm, 40/pk

Nylon Filtration Media
AV125SNAO Autovial 12 Syringeless Filter, glass prefilter, sterile, nylon, 0.2 µm, 40/pk
AV125ENAO Autovial 12 Syringeless Filter, glass prefilter, nylon, 0.2 µm, 50/pk
AV125UNAO Autovial 12 Syringeless Filter, glass prefilter, nylon, 0.45 µm, 50/pk
AV525UNAO Autovial 12 Syringeless Filter, glass prefilter, nylon, 0.45 µm, 1000/pk
PVDF Filtration Media
AV125SAQU Autovial 12 Syringeless Filter, glass prefilter, sterile, PVDF, 0.2 µm, 40/pk
AV125EAQU Autovial 12 Syringeless Filter, glass prefilter, PVDF, 0.2 µm, 50/pk
AV125UAQU Autovial 12 Syringeless Filter, glass prefilter, PVDF, 0.45 µm, 50/pk
AV525UAQU Autovial 12 Syringeless Filter, glass prefilter, PVDF, 0.45 µm, 1000/pk
PTFE Filtration Media
AV125SORG Autovial 12 Syringeless Filter, glass prefilter, sterile, PTFE, 0.2 µm, 40/pk
AV125EORG Autovial 12 Syringeless Filter, glass prefilter, PTFE, 0.2 µm, 50/pk
AV125UORG Autovial 12 Syringeless Filter, glass prefilter, PTFE, 0.45 µm, 50/pk
AV525UORG Autovial 12 Syringeless Filter, glass prefilter, PTFE, 0.45 µm, 1000/pk
GMF Filtration Media
AV125UGMF Autovial 12 Syringeless Filter, glass prefilter, GMF, 0.45 µm, 50/pk
GF/B Filtration Media
AV525BGMF Autovial 12 Syringeless Filter, glass prefilter, GF/B, 1.0 µm, 1000/pk
Autovial 12 – With Polypropylene Prefilter
PP Filtration Media
AV125EPP Autovial 12 Syringeless Filter, Polypropylene prefilter, PP, 0.2 µm, 50/pk
AV125UPP Autovial 12 Syringeless Filter, Polypropylene prefilter, PP, 0.45 µm, 50/pk