whatman囊式特氟龙过滤器
whatman囊式特氟龙过滤器
产品型号: whatman囊式特氟龙过滤器
产品展商: 其它品牌
简单介绍
产品名称：whatman囊式特氟龙过滤器型号：Polycap TF 囊式特氟龙过滤器 Polycap TF过滤装置是一次性精细囊式过滤器中的一种。这些囊式过滤器是由耐用、疏水性的PTFE膜和聚丙烯外壳制成，用于有机和化学腐蚀性强溶液的过滤。应用和优点·对大多数溶剂有相容性，可加压加热可测试完整性·有0.5，0.1，0.2，0.45和1.0µ；m孔径·0.05µ；m囊式用于超滤应用；1.0µ；m用于
whatman囊式特氟龙过滤器的详细介绍
产品名称：囊式特氟龙过滤器whatman囊式特氟龙过滤器
型号：Polycap TF 囊式特氟龙过滤器
Polycap TF过滤装置是一次性精细囊式过滤器中的一种。这些囊式过滤器是由耐用、疏水性的PTFE膜和聚丙烯外壳制成，用于有机和化学腐蚀性强溶液的过滤。
应用和优点
·对大多数溶剂有相容性，可加压加热可测试完整性
·有0.5，0.1，0.2，0.45和1.0µ；m孔径
·0.05µ；m囊式用于超滤应用；1.0µ；m用于延长寿命和过滤高污染溶液
·可用蒸汽或EtO加压加热消毒
·ISO质量体系下在10,000级的清洁室内环境下生产
应用
·通气口 ·在线过滤 ·分离 ·电子 ·制药 ·生物技术 ·实验室 ·其他用途
| Technical Properties – Polycap TF | ||||
| Housing | Polypropylene | |||
| Membrane | PTFE | |||
| Vent | On inlet | |||
| Support system | Polypropylene | |||
| Sealing | Heat-fused | |||
| Maximum pressure | 4.1 bar (60 psi) | |||
| Flow direction | Supported bidirectionally. Certain applications may require orientation, i.e., vents. Reverse flow only for low pressure applications. | |||
| Biosafety | Materials pass USP Class VI | |||
| Sterilization | May be autoclaved at 121°C for 20 minutes (maximum 132°C). Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclaving. Compatible with EtO sterilization |
|||
| Filtration area | 36 mm capsule: 500 cm2 (77 in2) 75 mm capsule: 1000 cm2 (155 in2) 150 mm capsule: 2000 cm2 (310 in2) |
|||
| IPA bubble point | 0.05 µm membrane: > 2.4 bar (35 psi) 0.1 µm membrane: > 1.7 bar (25 psi) 0.2 µm membrane: > 0.9 bar (13 psi) 0.45 µm membrane: > 0.5 bar (7 psi) 1.0 µm membrane: > 0.2 bar (3 psi) |
|||
| SB – Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing 1/2 SB – Stepped barb for 10 to 12 mm (3/8 to 1/2") tubing MNPT – Male national pipe thread FNPT – Female national pipe thread HB – Hose barb |
||||
| Ordering Information – Polycap TF | ||
| Catalog Number | Description | |
| 6711-3601 | Polycap TF 36, 0.1 µm, with MNPT inlet and SB outlet, 1/pk | |
| 6711-3602 | Polycap TF 36, 0.2 µm, with MNPT inlet and SB outlet, 1/pk | |
| 6710-3602 | Polycap TF 36, 0.2 µm, with 1/2 SB inlet and outlet, 1/pk | |
| 6700-3602 | Polycap TF 36, 0.2 µm, with SB inlet and outlet, 1/pk | |
| 2601 | Polycap TF 36, 0.2 µm, 5/pk | |
| 2601T | Polycap TF 36, 0.2 µm, with FNPT inlet and outlet, 5/pk | |
| 6711-3604 | Polycap TF 36, 0.45 µm, with MNPT inlet and SB outlet, 1/pk | |
| 6710-3604 | Polycap TF 36, 0.45 µm, with SB inlet and outlet, 1/pk | |
| 2602S | Polycap TF 36, 0.45 µm, with 1 1/2" Sanitary inlet and outlet, 5/pk | |
| 6700-3610 | Polycap TF 36, 1.0 µm, with SB inlet and outlet, 1/pk | |
| 2603 | Polycap TF 36, 1.0 µm, 5/pk | |
| 2603T | Polycap TF 36, 1.0 µm, with FNPT inlet and outlet, 5/pk | |
| 6711-7505 | Polycap TF 75, 0.05 µm, with MNPT inlet and SB outlet, 1/pk | |
| 6700-7501 | Polycap TF 75, 0.1 µm, with SB inlet and outlet, 1/pk | |
| 6711-7501 | Polycap TF 75, 0.1 µm, with MNPT inlet and SB outlet, 1/pk | |
| 2700M | Polycap TF 75, 0.1 µm, with MNPT inlet and outlet, 5/pk | |
| 2700T | Polycap TF 75, 0.1 µm, with FNPT inlet and outlet, 5/pk | |
| 6711-7502 | Polycap TF 75, 0.2 µm, with MNPT inlet and SB outlet, 1/pk | |
| 6710-7502 | Polycap TF 75, 0.2 µm, with SB inlet and outlet, 1/pk | |
| 6700-7502 | Polycap TF 75, 0.2 µm, with SB inlet and outlet, 1/pk | |
| 2702M | Polycap TF 75, 0.2 µm, with MNPT inlet and outlet, 5/pk | |
| 2702T | Polycap TF 75, 0.2 µm, with FNPT inlet and outlet, 5/pk | |
| 6711-7504 | Polycap TF 75, 0.45 µm, MNPT inlet and SB outlet, 1/pk | |
| 6710-7504 | Polycap TF 75, 0.45 µm, with 1/2 SB inlet and outlet, 1/pk | |
| 6700-7504 | Polycap TF 75, 0.45 µm, with SB inlet and outlet, 1/pk | |
| 2703T | Polycap TF 75, 0.45 µm, with FNPT inlet and outlet, 5/pk | |
| 6700-7510 | Polycap TF 75, 1.0 µm, with SB inlet and outlet, 1/pk | |
| 6701-7510 | Polycap TF 75, 1.0 µm, with 1/2 SB inlet and outelt, 1/pk | |
| 2704T | Polycap TF 75, 1.0 µm, with FNPT inlet and outlet, 5/pk | |
| 2800T | Polycap TF 150, 0.1 µm, with FNPT inlet and outlet, 5/pk | |
| 2802 | Polycap TF 150, 0.2 µm, with HB inlet and outlet, 5/pk | |
| 2802T | Polycap TF 150, 0.2 µm, with FNPT inlet and outlet, 5/pk | |
| 2801 | Polycap TF 150, 0.2 µm, with 1 1/2" Sanitary inlet and outlet, 5/pk | |
| 2803 | Polycap TF 150, 0.45 µm, with HB inlet and SB outlet, 5/pk | |
| 2803T | Polycap TF 150, 0.45 µm, with FNPT inlet and outlet, 5/pk | |
| 2804T | Polycap TF 150, 1.0 µm, with FNPT inlet and outlet, 5/pk | |