手持数显均质乳化机
货号:PT1300D
规格:0.01 – 250 mL;2000-30000rpm
报价:¥21200.00
商品描述
主机价格,不包括配件。
这种手持式均质机是处理小数量,小体积样本的理想选择。符合人体工程学的设计和低体重的PT1300D,很容易以最小的能源实现重复使用。
存储所需的速度,确保重复性和可再生。当本机被关闭,最后存储的速度被保存。
该驱动器可以使用我们的KIN软件从PC通过USB或RS232控制。如果需要,还可以安装一个独立的支架,可以有不同的体积可以选用,从0.01毫升3mm直径的体积到250毫升12mm。如果从样品到样品的交叉污染是一个问题,我们提供了单一使用化学合成的容器在7毫米和12毫米直径之间,PT-DA20/2 X EC。
优点
低电压24伏,100瓦的电机,安全变压器
数字从2,000到30,000 RPM的转速控制
总结小费高达14米/秒的速度产生的最细小的颗粒可能
速度保持不变,即使粘度变化
软启动防止飞溅的匀浆样品容器
热过载保护的保险丝
PC接口(RS-232和USB)
备忘函数的所存储的速度
指尖输入的参数,易于清洗键盘膜
人性化设计
分散头选型指南
产品型号 PT-DA 1305/2EC PT-DA 1307/2EC PT-DA 1207/2 SYN-E PT-DA 1312/2EC
破碎杆长度 55 mm
80 mm 82 mm 115 mm
定子/转子直径 5.6 mm / 3 m 7.8 mm / 5 mm 7.8 mm / 5 mm 12 mm / 9 mm
圆周线速度 4.7 m/s 7.8 m/s 7.8 m/s 14.1 m/s
推荐固液比 1:5 1:5 1:5 1:10
适合工作容积 0.1 – 5 ml 0.3 – 10 ml 0.3 – 10 ml 2 – 250 ml
推荐使用的分散容器 适合各种试管,Eppendorf 管,或其它,直径在6-7mm的容器 适合各种试管,Eppendorf 管,或其它,直径在8-9mm的容器 适合各种试管,Eppendorf 管,或其它,直径在8-9mm的容器 适合KINEMATICAGS 15分散杯,或其它直径在15mm以上的试管,烧杯等
应用案例 破碎很小量的植物,动物或人体组织,如用于 RNA的提取; 细胞破碎; 固液溶解; 各种提取试验; 药片崩解试验; 各种乳化及悬浮试验
可选配刀头
11030004 PT-DA 03/2EC-E055
11030012 PT-DA 05/2EC-E085
11030031 PT-DA 07/2EC-E107
11030062 PT-DA 12/2EC-E123
11030030 PT-DA 07/2SYN-E082 (1 Paket with 25 pcs.)
可选配件
11050010 GS 15, Dispersing vessel with working volume max. 35 ml
11050011 GS 25, Dispersing vessel with working vol. max. 150 ml
POLYTRON ® PT 1300 D Manual Disperser (High End Line)
« Application volume 0.01 – 250 ml »
This homogenizer, either handheld or mounted on a swivel type stand, is ideal for quick processing of small sample quantities and volumes. The low weight of the PT 1300D makes it easy for repeated usages with minimal fatigue if handheld and makes for easy movement if in the stand. Storing the desired speed ensures repetitive and reproducible homogenizations. When the unit is switched off, the last stored speed is saved.
This drive can be controlled using our KIN software from a PC via USB or RS232. There are many different styles of aggregates available from 3mm in diameter for volumes down to 0.01 mL to 12mm for volumes up to 250mLs. If cross contamination from sample to sample is a concern, we offer single use synthetic aggregates in 7 and 12 mm diameters. One of the more recent additions to our line is the PT-DA 20/2 X EC aggregate which was specifically designed for homogenizing tablets.
Advantages
- 24Volt, 100 Watt low-voltage motor with safety transformer
- Digital speed control from 2,000 to 30,000 rpm
- Aggregate tip speeds up to 14 m/s produce the finest particles possible
- Speed remains constant even when viscosity changes
- Soft start prevents splashing of homogenate from sample vessel
- Thermal fuse for overload protection
- PC interfaces (RS 232 and USB)
- MEMO function of the stored speed
- Membrane keyboard for finger tip entry of parameters and easy cleaning
- User-friendly design
- Aggregate replacement using one-handed quick-release coupling
- Various models of dispersing aggregates which are Easy-to-Clean and for many different applications
Accessories
We offer the following accessories support your sample preparation needs.
- Two different stands